Forwarding Calls; Forwarding Types; Forwarding Your Calls Immediately To Voice Mail; Programming Your Station To Forward Calls To Another Extension - iPECS LIP-9040 Operation Manual

Hide thumbs Also See for LIP-9040:

User manual (75 pages)

Table Of Contents

Table of Contents

LIP-9040

Telephone Operation Guide

4. Enter the bin number containing the phone number you want programmed on the selected flexible

button.

5. Press [Hold]

6. Repeat steps 2 through 5 if any additional flexible buttons require programming.

7. Press [Speaker] to exit programming.

Forwarding Types

1. The forwarding program is reached by selecting the [Forward] soft key. Press right once (next to the

[OK] button to reveal the [Forward] soft key while not on a call.

2. The forward types presented are 0 through 5 and #. These are their definitions.

(a) Forward type [0] is not used in your iPECS implementation.

(b) [1] forwards all calls immediately and unconditionally.

(d) [3] forwards all calls when the forwarded station does not answer.

(e) [4] forwards all calls when the forwarded station is busy or does not answer.

(f) Forward type [5] is not used in your iPECS implementation.

(g) [#] cancels forwarding.

Forwarding your calls immediately to voice mail

Please note that all end user stations are already configured to forward to voice mail when not

answered, DND, or an internal call reaches a busy station. Using the forwarding feature to manually

forward such calls to voice mail is not required.

1. While on-hook press [DND]

2. The [DND] button will now be lit and the station screen will indicate the do not disturb state.

3. To disable, press [DND] again.

Programming your station to forward calls to another extension

1. Press the [Forward] soft key.

2. Dial a forwarding type, each type is defined in the "Forwarding Types" section.

3. Dial the extension you wish to forward your calls to.