Omron SYSDRIVE 3G3RV Series User Manual page 20

Name
LCD brightness
adjustment
Operation selection
when Digital Opera-
tor is disconnected
Cumulative opera-
tion time selection
Fault trace and fault
history initialization
Fault history
-6
1
Table 1.4 Differences in Software (Continued)
Parameter Number
o1-05 Cannot change.
Factory setting
o2-06
0 (Disabled)
Factory setting = 0
o2-08 (Cumulative time when the Inverter
power is ON)
o2-12 Cannot clear
Four fault history records are stored.
U3-01 to U3-08 are enabled.
U3-01 to U3-20 Serial communications addresses 90H
to 97H are enabled. (800H to 813H are
disabled)
Asia
Setting Range: 0 to 5
Adjusts the brightness in five steps.
Factory setting
0 (Disabled)
Factory setting = 1
(Cumulative Inverter run time)
0: Disabled
(U2, U3 are held.)
1: Initialize Enabled
(U2, U3 are cleared and o2-12 returns
to 0.)
Ten fault history records are stored.
U3-01 to U3-20 are enabled.
Serial communications addresses
800H to 813H and 90H to 97H are
both enabled.
Europe
* * * * suffixed -E