Omron SYSDRIVE 3G3RV Series User Manual page 311

DM Area
Board
Port 1 Port 2 Port 1
D32000 D32010 m
D32001 D32011 m+1
- - -
D32008 D32018 m+8
D32009 D32019 m+9
* Set to this value.
For the SYSMAC C200HX/HG/HE and CQM1H Series:
Use the following ports for the SYSMAC C200HX/HG/HE and CQM1H series.
• C200HW-COM06-V1 Communications Board: Port A
• CQM1H-SCB41 Serial Communications Board: Port 2
Communications
Board
Bit
Port 1 Port 2
Port A Port B
00 to 03
04 to 11
DM6555 DM6550
12 to 15
Unit Bit
Port 2
15 Port setting -- 0: Default, 1*: Desired setting
14 to 12 Reserved
Serial communications mode
11 to 08
(6 Hex*: Protocol macro)
07 to 05 Reserved
m+10 Start bit -- 0*: 1 bit, 1: 1 bit (fixed at 1 bit regardless of
04
the setting)
03 Data length -- 0: 7 bits, 1*: 8 bits
02 Stop bit -- 0: 2 bits, 1*: 1 bit
01 Parity -- 0: With, 1*: Without
00 Parity -- 0*: Even, 1: Odd
15 to 04 Reserved
Transmission rate (unit: bps)
m+11
03 to 00 0: Default (9,600), 3: 1,200, 4: 2,400, 5: 4,800,
6*: 9,600, 7: 19,200, 8: 38,400
-
Transmission method -- 0: Half-duplex, 1*: Full-
15
duplex
m+18
14 to 00 Reserved
Max. number of bytes in send/receive data -- 00C8* to
m+19 15 to 00
03E8 Hex
Standard format setting
0 Hex: Standard setting (default)
*
1 Hex : Settings in bits 00 to 15 of DM6656 and DM 6551 are used.
00: Default
Serial Communications Board
0 Hex: Host link (default)
1 Hex: Not protocol
2 Hex: 1:1 Link slave
3 Hex: 1:1 Link master
4 Hex: NT link (1:1 mode)
5 Hex: Hex: NT link (1:N mode)
*
6 Hex : Protocol macro
Communications Functions
m = D30000 + 100 x Unit No. (Wd)
Setting
Setting
Value
'

'

%
Value
6001
95
6-