Omron SYSDRIVE 3G3RV Series User Manual page 200

Param-
eter
Number
Display
Motor rated
current
T1-04
Rated Cur-
rent
Motor base
frequency
T1-05
Rated Fre-
quency
Number of
motor poles
T1-06
Number of
Poles
Motor base
speed
T1-07
Rated Speed
* 1. Set T1-02 and T1-04 when 2 is set for T1-01. Only set value 2 is possible for V/f control or V/f control with PG.
* 2. These are values for a 200-V class Inverter. Values for a 400-V class Inverter are double.
* 3. The factory setting depends on the Inverter capacity. (The value for a 200-V class Inverter for 0.4 kW is given.)
* 4. The setting range is from 10% to 200% of the Inverter rated output current. (The value for a 200-V class Inverter for 0.4 kW is given.)
* 5. The upper setting limit will be 150.0 Hz when C6-01 is set to 0.
-74
5
Name
Description
LCD
Set the rated current of the
motor in amps.
Set the base frequency of the
motor in hertz.
Set the number of motor
poles.
Set the base speed of the
motor in r/min.
Control Methods
Change
during
Setting Factory
Range Setting
Opera-
tion
0.32 to
1.90 A
No
*4
6.40 *3
0 to
60.0
No
*5
Hz
400.0
2 to 48
4 poles No
poles
0 to 1750
No
24000 r/min
V/f
Register Page
Open
V/f with
Loop
PG
A A A 704H
No No A 705H
No No A 706H
No No A 707H
4-13
4-13
4-13
4-13