Wipers And Washers; Front Wiper Control Lever - Mahindra XUV 500 Owner's Manual

FEATURES AND CONTROLS

Wipers and Washers

Front Wiper Control Lever

• OFF / Normal position
• Flick Wipe (MIST)
Intermittent (INT)
•
• Low Speed (LOW)
• High Speed (HIGH)
• Auto Wipe
• Intensity switch (Vary speed)
T h e w i n d s h i e l d w i p e r a n d w a s h e r
operates when the ignition switch is in ON
position.
2-32
OFF / Normal position
This is the normal position of the wiper
lever, where the wiper is not in operation.
Flick Wipe (MIST)
For a single wiping cycle, push the lever
upward and release it. The wipers will
operate continuously if the lever is
pushed and held upward.
Intermittent (INT)
Speed Intensity switch
Push the lever downward to select
intermittent (INT) wiping. Wiper operates
intermittently at the same wiping intervals.
Use this mode in light rain or mist. To vary
the speed setting, rotate the speed
intensity switch.
V102011© Copyright Mahindra & Mahindra Ltd.