Mahindra XUV 500 Owner's Manual page 142

The steering wheel switches operate as
follows:
+
V
-
1. CRUISE OFF : Press to suspend /
cancel the cruising speed
2. SET(+ / -) : Press (+) to increase the
cruising speed. Press (-) to decrease
the cruising speed
3. RES : Press to resume the cruising
speed
V102011© Copyright Mahindra & Mahindra Ltd.
To Operate
Accelerate until the desired cruising
speed is reached. This must be above the
system's operational minimum speed i.e.
20 kmph.
3
Press the (+) switch to set the vehicle
speed in the system's memory. Cruise
Control will now maintain that road speed.
2
1
The warning indicator in the instrument
cluster illuminates. With Cruise Control
operating, speed can be increased by
normal use of the accelerator e.g. for
overtaking. When the accelerator is
released, road speed will return to the
previously set cruising speed.
DRIVING AND OPERATION
To Increase Cruising Speed
Press and hold the (+) switch; the vehicle
will accelerate. Release the switch as
soon as the desired speed is reached.
The vehicle speed at the point of switch
release becomes the new set speed.
Alternatively, the speed can be increased
incrementally by tapping the (+) switch.
Each press of the switch will increase the
speed by 2 km/hr.
A further alternative is to increase speed
by normal use of the accelerator. When
the desired speed is reached, press the
(+) switch to set the Cruise Control.
NOTICE
Cruise Control will not operate at
speeds below 20 kmph.
3-25