Cruise Control - Mahindra XUV 500 Owner's Manual

DRIVING AND OPERATION
Cruise Control (If equipped)
Cruise Control enables the driver to
maintain a constant road speed without
the accelerator pedal. This is particularly
useful for motorway cruising or for any
journey where a constant speed can be
maintained for a long period. Cruise
Control is designed to activate for all
gears except 1st when the vehicle speed
is above 20 km/hr.
3-24
NOTICE
Always ensure following conditions
met while operating Cruise Control:
• Vehicle speed should be more than
20 km/hr with gears in 2nd,3rd, 4th,
5th or in 6th gear
• Clutch pedal should not be in
pressed condition
• B ra k e p e d a l s h o u l d n o t b e i n
pressed condition
• O n c e t h e C r u i s e C o n t r o l i s
activated with the help of SET (+)
button, user has to remove the foot
from the accelerator pedal
• Vehicle should follow the cruising
mode
CAUTION
Always observe
precautions:
• Do not use cruise control in traffic
conditions where a constant speed
cannot easily be maintained
• D o no t u se cru is e c on tr ol o n
winding or slippery road surfaces,
or in off-road conditions such as
rough tracks or on sand
• W h e n t h e ' S E T ( + ) ' b u t t o n i s
pressed, if the acceleration is felt to
be too fast and vehicle goes beyond
c o n t r o l , p r e s s b r a k e o r c l u t c h
immediately for safety and coming
out of Cruise Control
V102011© Copyright Mahindra & Mahindra Ltd.
the following