Windshield Wipers - Mahindra XUV500 2012 Owner's Manual

Windshield Wipers

Wiper Control Stalk
A Flick Wipe (MIST)
B Off
C Intermittent (INT)
© Copyright Mahindra & Mahindra Ltd. v062012
F
A
B
C
D
E
D Low Speed (LO)
E High Speed (HI)
F Intermittent Speed
Wiper Off
The wipe function is OFF when the wiper control stalk is in
neutral position (B).
Flick-Wipe (Mist)
Push the wipe control stalk to position (A) for a flick-wipe,
hold to operate the wipe continuously (simultaneously lift the
wiper stalk towards the steering wheel to operate the wash).
The stalk automatically comes back to position (B) when
released.
Intermittent (INT) Mode
Intermittent (INT) wiping is selected when the wipe control
stalk is pushed down to position C. In the INT mode, the wiper
operates on preset intervals.
The delay between each wipe can be varied by rotating the
wiper speed intensity rotary switch (F).
Low Speed Wiping
Push the wipe control stalk down to the position (D) to
operate the wiper at a fixed low speed.
High Speed Wiping
Push the wiper control stalk down to position (E) to operate
the wiper at a fixed high speed.
FEATURES AND CONTROL
07
139