Windshield Wipers - Mahindra XUV 500 Owner's Manual

The turn lamps do not work when the hazard warning lamps
are operational.

8.11 Windshield Wipers

8.11.1 Wiper Control Stalk
© Copyright Mahindra and Mahindra Ltd. 052016
F
A
B
C
D
E
W22H145
Flick Wipe (MIST)
A
B Off
Intermittent (INT)
C
8.11.2 Wiper Off
The wipe function is OFF when the wiper control stalk is in neutral
position (B).
8.11.3 Flick-Wipe (Mist)
Push the wipe control stalk to position (A) for a flick-wipe, hold to
operate the wipe continuously (simultaneously lift the wiper stalk
towards the steering wheel to operate the wash). The stalk
automatically comes back to position (B) when released.
8.11.4 Intermittent (INT) Mode
Intermittent (INT) wiping is selected when the wipe control stalk is
pushed down to position C. In the INT mode, the wiper operates on
preset intervals.
The delay between each wipe can be varied by rotating the wiper
speed intensity rotary switch (F).
FEATURES AND CONTROL
Low Speed (LO)
D
High Speed (HI)
E
Intermittent Speed
F
8-35