Windshield Wipers - Mahindra 2016 KUV100 K2 Owner's Manual

FEATURES AND CONTROL
• Use the power outlets only when the engine is running.
Remove the plug from the power outlet after using the
electric device. Using the power outlets when the engine is
OFF or leaving the electric device plugged in for many hours
may cause the battery to drain
• Do not use the power outlet to connect electric accessories
or equipment that are not designed to operate on 12V
• Some electronic devices can cause electronic interference
when plugged into the power outlet. These devices may
cause excessive audio noise and may interfere with other
electronic systems or devices in your vehicle

8.9 Windshield Wipers

8.9.1 Wiper Control Stalk
The wipe/wash function can be activated only when the ignition is in
"IGN" position.
Flick Wipe (MIST)
A
B Off
Intermittent (INT)
C
Low Speed (LO)
D
High Speed (HI)
E
8-16
8.9.2 Wiper Off
The wipe function is OFF when the wipe control stalk is in neutral
position (B).
8.9.3 Flick-Wipe (Mist)
Push the wipe control stalk to position A for a flick-wipe, hold to
operate the wipe continuously (simultaneously lift the wiper stalk
towards the steering wheel to operate the wash). The stalk
automatically comes back to position B when released.
S12H24
© Copyright Mahindra & Mahindra Ltd.012016