Steps To Set Up Ppi Printing - Neopost IS-5000 User Manual

Steps to Set Up PPI Printing

Steps to Set Up
PPI Printing
Once your mail stack is ready:
1
Make sure you are on the home screen of the Imprint Type
[ PPI ]. The name of the imprint type is indicated on the first
line of the home screen as illustrated below.
If necessary, see
2
Select the PPI to use.
To change the PPI, press the PPI area on the screen and
select a PPI in the list.
For details, see
3
Select a weighing type
The weighing type determines which weighing device will be
used and the weight is used for reporting purposes. If the
batch is all the same size and weight, use Batch mode (if you
have a Dynamic Weighing Module) or standard weighing to
weigh and record the first piece. See
Mode
p.63 .
To change the current weighing mode, press the Weighing
Modes button
options screen.
To change the current weighing mode, press the Weighing
mode button and select a weighing mode from the options
screen.
How to Change the Imprint Type
Selecting a PPI
p.74 .
and select a weighing mode from the
p.59 .
Selecting a Weighing
3
51