Assigning Accounts to the Operators
You can define account access to operators by assigning them accounts, groups or
subgroups of accounts.
Assigning a group (or subgroup) automatically assigns all the accounts of the group.
How to Assign Accounts to an Operator
How to Assign
Accounts to an
Operator
If you assign a group (or subgroup) to an operator, all accounts
added afterwards to the group will be automatically assigned to
the operator.
On user screens, only accounts are displayed. Groups and sub-
groups are only visible to the supervisor.
To change the list of Accounts an Operator is allowed to use:
1
Follow the procedure
the
Edit modify
2
Press Create a new account .
Account List
The
3
Select Add Acct/Group .
Account list
The
4
You can assign entire groups or subgroups to the operator.
Select a group and press Enable/Disable ), or select ac-
counts and press Enable/Disable ).
5
Press
to return to the
6
Press [OK/Finish] to validate the assignments.
How to Modify an Operator
screen is displayed
screen is displayed.
screen is displayed.
Edit / modify
p.126 until
screen.
5
127