To Assign A Department - Neopost IJ-35 User Manual

Using the
make your selection and press
To return to the SUPERVISOR screen press
To reactivate the user PIN select 2 OPEN, then
Press
return to Standby "Sleep" mode.
From the SECURITY & DEPT menu, move the cursor to
DEPARTMENT MODE.
Press
The following screen will be observed:
Using the
move the cursor to ENABLED and press
be returned to the SECURITY & DEPT screen with department
mode ENABLED.
Using the
move the cursor to SETUP DEPT and press
4127759Y/C
01/02/2006
and
once to return to the Supervisor main menu, or twice to

15.3.3 To Assign a Department

to confirm.
DEPARTMENT MODE
ESC
and
SECURITY & DEPT
1 DEPARTMENT MODE
2 SET UP DEPT
3 DEPARTMENT SELECTION
4 LAST RESET ALL
5 USER PIN
ESC
and
78 Supervisor settings
keys, or the appropriate number key,
to confirm.
1 DISABLED
2 ENABLED
keys, or the appropriate number key,
to confirm, you will
ENABLED
PICK FROM LIST
00/00/00
1234
keys, or the appropriate number key,
IJ40-0006-78/B
.
to confirm.
OK
OK
to confirm.