Turning the System On/Off
This section describes how to turn on or off the Video Communication System.
Turning On
Before turning on the system, make sure that the system connections have been
completed correctly.
For connecting the system, see "System Connections" on page 23.
1
Turn on the power of any equipment to be used for the videoconference.
2
Press the
The indicator of the switch lights in green and the Video Communication
System turns on after a while. The launcher menu will appear on the display
and the picture shot by the local camera will also appear in the launcher menu.
Launcher menu
28
Turning the System On/Off
(power) switch on the right side of the system.
1
IP:012.345.678.912
ISDN:012345678912
1
2
3
Bob
John
OSAKA
ISDN
Press the PUSH ENTER button on the Remote Commander to adjust the camera angle.
1
(power) switch
Detailed Dial
Phone Book
4
5
6
NEW YORK
Dial