Sending A Still Image Stored In A "Memory Stick - Sony PCS-TL50 Operating Instructions Manual

To delete a still image
Display the Memory Stick menu, select the still image you want to delete, and
press the ENTER button. Select "Delete" from the displayed submenu with the
V or v button, then press the ENTER button. The selected still image is deleted
from the "Memory Stick".
To remove the "Memory Stick"
Push the "Memory Stick" and release your finger. The "Memory Stick" will
come out a little, and you can then remove it.

Sending a Still Image Stored in a "Memory Stick"

While in communication, you can send still images stored in a "Memory Stick"
to the remote party.
1
Insert a "Memory Stick" into the Memory Stick slot on the Video
Communication System, and display the Memory Stick menu.
For how to insert a "Memory Stick" and how to display the Memory Stick
menu, see "Displaying a Still Image Stored in a "Memory Stick"" on page
118.
2
Use the V, v, B or b button on the Remote Commander to select the still
image you want to send, then press the ENTER button.
The submenu appears.
3
Use the V or v button to select "Send", then press the ENTER button.
The selected still image is displayed, and is sent to the remote party. The
message "The still image has been sent." appears on the display.
When you select "Slide Show" in step 3 above
If you select "Slide Show" from the submenu and press the ENTER button, a
slide show starts from the selected still image, and it will be sent to the remote
party.
Using Still Images Stored in a "Memory Stick" for a Videoconference
Memory Stick
2
Send
Load
Delete
Slide Show
Save
121