Sony PCS-TL50 Operating Instructions Manual page 50

Page 2/11
LAN Setup
Page: 2/11
Gatekeeper Mode
Gatekeeper Address
User Alias
User Number
Gatekeeper Mode
Sets whether you use the gatekeeper that
controls access to a LAN.
Using the gatekeeper allows you to dial
using the user name or user number.
On: Enables use of the gatekeeper.
Off: Disables use of the gatekeeper.
Auto: Detects the gatekeeper automatically
and uses it.
Gatekeeper Address
Enter the gatekeeper address used when
"Gatekeeper Mode" is set to "On".
User Alias
Enter the user name (H.323 alias) to be
registered in the gatekeeper (up to 30
characters).
User Number
Enter the user number (E.164 number) to be
registered in the gatekeeper (up to 30
characters).
Page 3/11
LAN Setup
Page: 3/11
SNMP Mode
Trap Destination
Community
Description
Location
Contact
SNMP Mode
Selects whether the SNMP (Simple Network
Management Protocol) agent service is
enabled or not.
50
Registering Local Information
Off
. . .
Save Cancel
Off
. . .
public
Videoconference Device
Save Cancel
On: Enables the SNMP agent service.
Off: Disables the SNMP agent service.
Trap Destination
Enter the address of the trap destination
SNMP manager.
Community
Enter the community name managed by the
SNMP manager (up to 24 characters). The
default setting is "public". Normally, there is
no need to change.
Description
Enter the description of this system. The
default setting is "Videoconference Device"
and cannot be changed.
Location
Enter the location where this system is
installed (up to 30 characters).
Contact
Enter information on the administrator of
this system (up to 30 characters).
Page 4/11
LAN Setup
Page: 4/11
NAT Mode
NAT Address
Packet Resend Request
Adaptive Rate Control
LAN Mode
Packet Loss Indicator
NAT Mode
Selects whether you connect the system to a
network using NAT (Network Address
Translation) that enables sharing of one IP
address for multiple computers on the same
LAN.
On: Enables the NAT mode when you
connect the system to a network using
NAT. With this option, set the NAT
address.
Off: Disables the NAT mode when you
connect the system to a network without
using NAT.
Auto (UPnP): Enables or disables the NAT
mode by automatically detecting the use
Off
. . .
On
On
Auto Negotiation
On
Save Cancel