Ending The Multipoint Videoconference - Sony PCS-TL50 Operating Instructions Manual

Ending the Multipoint Videoconference

1
Press the CONNECT/DISCONNECT (
Commander.
The following submenu appears.
1
2
Use the V, v, B or b button to select "Disconnect", then press the ENTER
button.
The screen changes to the split window screen and the following menu appears.
The location of the pictures in the split windows A to E (or A to C) is restored
to that when the terminals were connected.
You can display the terminal names in this window if you set "Display
Terminal Name" to "On" in the Multipoint Setup menu.
Picture D
Picture E
3
Use the V, v, B or b button to select the terminal to be disconnected, then
press the ENTER button.
Disconnect A: Disconnects the terminal connected first.
Disconnect B: Disconnects the terminal connected second.
Disconnect C: Disconnects the terminal connected third.
Disconnect D: Disconnects the terminal connected fourth.
Disconnect E: Disconnects the terminal connected fifth.
Disconnect All: Disconnects all the terminals.
180
Ending the Multipoint Videoconference
Disconnect
2 3
Bob John OSAKA
Picture A Picture B
Disconnect A
Disconnect D
Disconnect E
/ ) button on the Remote
Phone Book
Detailed Dial
Cancel
4 5
NEW YORK
Picture C
Disconnect B Disconnect C
Disconnect All
Cancel
Local picrure
6