Ending The Conference - Sony PCS-TL50 Operating Instructions Manual

Video communication system
Hide thumbs Also See for PCS-TL50:
Table of Contents

Advertisement

To display an elapsed communication time
You can show an elapsed communication time on the display if "Time
Display" in the General Setup menu is set to "On".
To turn the indicator off, set "Time Display" in the General Setup menu to
"Off". You can also turn off the indicator by selecting "Icon display OFF" in
the communication submenu during communication with a remote party.
For "Time Display" setting, see "General Setup Menu" on page 46.

Ending the Conference

1
Press the CONNECT/DISCONNECT (
Commander.
The message "Disconnect?" appears on the display.
2
Press the B or b button on the Remote Commander to select "OK", then
press the ENTER button, or press the CONNECT/DISCONNECT (
) button on the Remote Commander again.
The line is disconnected.
Note
The power of the system remains on even if the line is disconnected.
To cancel disconnection of the system
Select "Cancel" with the B or b button, then press the ENTER button.
/
) button on the Remote
Receiving a Call from a Remote Party
/
97

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ipela pcs-tl50

Table of Contents