Sony PCS-TL50 Operating Instructions Manual page 173

2
Select
"Multipoint"
IP
3
Set up the line interface for all the remote parties to be connected for a
multipoint conference in the A to E text boxes.
Select the interface from the drop-down list on the right of the text box.
1
Select "IP" for the LAN connection, "ISDN" for the ISDN connection,
"TEL" for a normal phone, or "SIP" for the SIP connection.
2 Enter the address or telephone number of the remote party in the text box.
When "IP" is selected: IP address
When "ISDN" is selected: ISDN telephone number
When "TEL" is selected: Telephone number
When "SIP" is selected: Address for SIP
Repeat and
3 1
A
B
C
D
E
For details on the setups, see step 3 in "Calling a Remote Party not
Registered in the Phone Book Using the Detailed Dial Menu" on page 91.
4
Select "Dial", and press the ENTER button on the Remote Commander.
You can also press the CONNECT/DISCONNECT (
Remote Commander.
The system begins dialing the numbers selected in step 3. "
appears on the display.
When the system connects to all the remote parties, the message "Meeting
starts!" appears on the display.
under "Line I/F".
Detailed Dial
Line I/F
ISDN IP
ISDN
ISDN (2B)
6B(384k)
ISDN (Telephone)
Multipoint
SIP
Dial Save
for each remote party to fill the A to E text boxes.
2
Detailed Dial
Line I/F
IP
Multipoint
IP
LAN Bandwidth
1024 Kbps
IP
Number of Lines
6 B (384K)
IP
IP
Dial Save
Starting a Multipoint Videoconference
/ ) button on the
Dialing"
173