Sony PCS-TL50 Operating Instructions Manual page 79

Video communication system
Hide thumbs Also See for PCS-TL50:
Table of Contents

Advertisement

1
Set "PPPoE" to "On" under Page 10/11 of the LAN Setup menu, and enter
the PPPoE user name and PPPoE password given to you by the provider.
LAN Setup
Page:10/11
PPPoE
PPPoE User Name
PPPoE Password
2
If you have a fixed IP from the provider, set "Fixed IP for PPPoE" to "On",
and enter your fixed IP address for PPPoE in "Fixed IP Address for
PPPoE" under Page 11/11 of the LAN Setup menu.
LAN Setup
Page:11/11
Fixed IP for PPPoE
Fixed IP address for PPPoE
PPPoE DNS
Primary DNS
Secondary DNS
The setting has been configured properly if the correct IP address appears in
the launcher menu.
Note
If the fixed DNS server address is specified by the provider, set "PPPoE DNS" to
"Specify", and enter the specific addresses in "Primary DNS" and "Secondary
DNS".
3
Remote parties must configure in the same way.
To conduct a videoconference
Select "IP" under "Line I/F", enter the remote party's IP address, and dial.
On
sony@aaa.ne.jp
abcdefgh
Save
Cancel
On
210.10.10.10
Obtain automatically
Save
Cancel
Setting Up the Network Configurations
79

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ipela pcs-tl50

Table of Contents