Sony PCS-TL50 Operating Instructions Manual page 247

Message
Memory Stick error.
General error.
No Memory Stick.
Memory Stick write-protected.
Memory full.
Memory Stick file error.
Memory Stick file decode error.
Memory Stick size error.
There are no images recorded in the
Memory Stick.
File error.
File size error.
File decode error.
Format error.
Settings cannot be changed during
communication.
The still images were not sent.
The presentation screen can not be sent.
Multipoint connection to this participant was
not made.
The LAN cannot be used.
The DATA SOLUTION BOX cannot be
used.
ISDN UNIT is not available.
No more cascade connections are enabled.
Cascade connection via ISDN is not
available.
Cannot send RGB data while receiving.
Meaning
The format of the "Memory Stick" is wrong.
–
Insert a "Memory Stick".
Release the lock of the erasure prevention switch
on the "Memory Stick".
The data has been saved in the "Memory Stick" to
its full capacity.
The file format of the "Memory Stick" is incorrect
or abnormal.
Decoding the JPEG file has failed.
The file size of the "Memory Stick" is not
acceptable.
No images are recorded in the "Memory Stick".
There is an abnormality in the file.
The file size is not acceptable.
Decoding the JPEG file has failed.
The "Memory Stick" cannot be formatted.
Change the setting after disconnecting the system.
Transmission of the still images has failed.
Transmission of the RGB data from the Data
Solution Box has failed.
Multipoint connection with this party is not
available.
You cannot use the LAN connection.
You cannot use the Data Solution Box connected.
Communication with the ISDN unit cannot be
made.
Installing the MCU software into three or more
Video Communication System does not allow
cascade connection.
You cannot use cascade connection when your
system is connected via ISDN.
While you are receiving an RGB picture from
another terminal, you cannot send an RGB picture
from equipment connected to the Data Solution
Box.
On Screen Messages
247