Multipoint Setup Menu - Sony PCS-TL50 Operating Instructions Manual

Video communication system
Hide thumbs Also See for PCS-TL50:
Table of Contents

Advertisement

For the AT&T 5ESS (National ISDN)
and AT&T 5ESS (Multipoint Custom
ISDN) switch type
Enter the SPID in the A1 text box only.
ISDN Setup
Page: 6/7
SPID
A1
019876532001
A2
B1
B2
C1
C2
For the NTI DMS-100 (National
ISDN), NTI DMS-100 (Custom
ISDN), AT&T 5ESS (National ISDN)
switch type
Enter the different SPID numbers in the
A1 and A2 text boxes.
ISDN Setup
Page: 6/7
SPID
A1
019876543001
A2
019876544001
B1
B2
C1
C2
For the AT&T 5ESS (Point-to-Point
Custom ISDN) switch type
You do not need to set up the SPID, then
no entry in the A1 and A2 (B1 and B2,
C1 and C2, depending on the number of
lines you use) is required.
Note
If you use the PCSA-B768S ISDN unit and
connect 4-6 ISDN lines, the D1-F2 text
boxes are shown in Page 3 and Page 7 of
the ISDN Setup menu. Fill in the boxes
following steps 3 and 4.
5
After the settings are completed,
select "Save", then press the ENTER
button.
58
Registering Local Information
Save
Cancel
Save
Cancel

Multipoint Setup Menu

The Multipoint Setup menu is used when
you conduct a multipoint videoconference.
Note
The Multipoint Setup menu is available when
the System has the optional PCS-320M1 H.320
MCU or PCS-323M1 H.323 MCU software
installed.
Page 1/2
Multipoint Setup
Page: 1/2
Multipoint Mode
Broadcast Mode
Number of Lines
Total LAN Bandwidth
Restrict
Multipoint Mode
Selects whether you conduct a multipoint
videoconference.
On: Always conducts a multipoint
videoconference.
Auto: Automatically shifts from a point-to-
point videoconference to a multipoint
videoconference.
Broadcast Mode
Selects the broadcast mode.
Split: Displays the pictures of the terminals
connected in split windows.
Voice Activate: Detects the terminal with
the speaker with the loudest voice, and
sends the picture of that terminal to all
other terminals.
Number of Lines
Selects the ISDN channels to be used for
connecting the first remote point.
1B (64K): Connects via a 1B channel.
2B (128K): Connects via 2B channels.
4B (256K): Connects via 4B channels.
6B (384K): Connects via 6B channels.
ISDN
Auto
Split
2B (128K)
1024 Kbps
Auto
Save
Cancel

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ipela pcs-tl50

Table of Contents