Preparing For A Videoconference Using Sip; Installing The Sip Software - Sony PCS-TL50 Operating Instructions Manual

Preparing for a Videoconference Using
SIP

Installing the SIP Software

Notes on installing the SIP software
• You cannot install the software if the write-protect tab on the "Memory
Stick" in which the SIP software is stored is set to "LOCK".
• Once the SIP software is installed in the Video Communication System, the
software will not be used again.
• You cannot install the SIP software which is copied to another "Memory
Stick" with a computer, etc.
1
Set the power switch on the right side of this System to the off position.
2
Insert the "Memory Stick" containing the PCSA SP1 SIP software into the
Memory Stick slot.
Insert the "Memory Stick" in the direction of the arrow with the mark facing
upward.
3
Set the power switch on the right side of this System to the on position.
The SIP software is installed in
192

Preparing for a Videoconference Using SIP

PCSA-SP1 SIP software
this System
.