Controlling the Remote System With
the Tone Signal – DTMF Transmission
The Video Communication System enables you to control the remote system
connected by transmitting the tone signal (DTMF: Dual Tone Multi
Frequency) assigned to the numbers for dialing (0-9,
1
Press the
The DTMF menu appears on the display.
2
Press one of the number buttons (0-9,
corresponding to the tone signal you want to transmit to the remote party.
The tone signal will be transmitted when the button is pressed.
3
To stop transmitting the tone signal, press the ENTER button on the
Remote Commander.
The DTMF menu disappears.
Controlling the Remote System With the Tone Signal – DTMF Transmission
button on the Remote Commander during communication.
,
).
,
) on the Remote Commander
135