Calling A Remote Party Not Registered In The Phone Book Using The Detailed Dial Menu - Sony PCS-TL50 Operating Instructions Manual

Note
You can also search for remote parties by pressing the number buttons on the Remote
Commander instead of the "0-9" tab on the Phone Book. Pressing the number button
lists the six party names which start with the alphabetical letter on the number button of
the Remote Commander.
Calling a Remote Party not Registered in the Phone Book Using
the Detailed Dial Menu
Using the Detailed Dial menu, you can specify the LAN bandwidth or the
number of ISDN channels to be used when you call a remote party not
registered in the Phone Book.
1
Use the V, v, B or b button on the Remote Commander to select "Detailed
Dial", then press the ENTER button, or press the CONNECT/
DISCONNECT (
The Detailed Dial menu appears on the screen.
2
Use the V, v, B or b button to select "Line I/F", then press the ENTER
button. The submenu appears. Press the V or v button to select the line
interface used to connect to the remote party, then press the ENTER
button.
IP
IP: Connects to the videoconferencing system of a remote party via a LAN.
ISDN: Connects to the videoconferencing system of a remote party via an
ISDN.
/ ) button on the Remote Commander.
Detailed Dial
IP
Dial
Detailed Dial
Dial
Starting a Conference by Calling a Remote Party
Line I/F
IP
LAN Bandwidth
1024 Kbps
Save
Line I/F
IP
LAN
ISDN
ISDN (2B)
ISDN(Telephone)
SIP
Save
91