Sony HVR-Z1J Service Manual page 473

A Shoe adaptor
To connect an accessory, press down and
push it to the end, and then tighten the
screw. To remove an accessory, loosen the
screw, and then press down and pull out the
accessory.
When you attach the shoe adaptor, be
careful not to damage the LCD panel.
B Lens hood (p. 20)
C OPEN/EJECT
D Cassette compartment lid (p. 18)
E Viewfinder lens adjustment lever (p. 15)
F PICTURE PROFILE button (p. 34)
G MENU button (p. 57)
H P-MENU button (p. 83)
I STATUS CHECK button (p. 24, 51)
J SEL/PUSH EXEC dial (p. 57)
To attach the shoe adaptor
130
Quick Reference
lever (p. 18)
To remove the lens hood
Loosen the lens hood fixing screw, then turn the
lens hood in the direction of the arrow.
Hood fixing screw
To attach the lens hood
Align the marks on the lens hood to those on the
camcorder, and turn the lens hood in the
opposite direction of the arrow in the figure
above. Tighten the lens hood fixing screw.