Camera System Adjustments; Origin Oscillation Check (Ntsc (60I) & Pal (50I) Modes) - Sony HVR-Z1J Service Manual

Ver. 1.7 2007. 10
The changed portions from
Ver. 1.6 are shown in blue.
1-3.

CAMERA SYSTEM ADJUSTMENTS

Before perform the camera system adjustments, (except for "Origin
Oscillation Check") check that the specified values of "VIDEO
SYSTEM ADJUSTMENTS" are satisfied.
And check that the data of page: 0, address: 10 is "00". If not, set
data: 00 to this address.
Note1: NTSC model: HVR-Z1J/Z1U/Z1N
PAL model: HVR-Z1E/Z1P/Z1C
Note2: Perform the adjustments in both modes, i.e. NTSC (60i) mode
and PAL (50i) mode.
NTSC (60i) mode:
Set the NTSC (60i)/PAL (50i) switch (DB-018 board S201) to
"NTSC (60i)".
PAL(50i) mode:
Set the NTSC (60i)/PAL (50i) switch to "PAL (50i)".
After completing the adjustments, reset the NTSC (60i)/PAL(50i)
switch to the following position.
"NTSC (60i)" (HVR-Z1J/Z1U/Z1N),
"PAL (50i)" (HVR-Z1E/Z1P/Z1C)
Order of Adjustments:
Note3: Perform these adjustments of all in NTSC (60i) mode first, and
then perform these adjustments of all in PAL (50i) mode.
1. Origin Oscillation Check (NTSC (60i) & PAL (50i) modes)
2. HALL Adjustment (NTSC (60i) mode)
3. MR Adjustment (NTSC (60i) mode)
4. Focus Ring Adjustment (NTSC (60i) mode)
5. Zoom Ring Adjustment (NTSC (60i) mode)
6. Flange Back Adjustment (NTSC (60i) mode)
7. Flange Back Check (NTSC (60i) mode)
8. HALL Adjustment (PAL (50i) mode)
9. MR Adjustment (PAL (50i) mode)
10. Focus Ring & Zoom Ring Adjustment (PAL (50i) mode)
11. Flange Back Adjustment (PAL (50i) mode)
12. Flange Back Check (PAL (50i) mode)
13. Picture Frame Setting (NTSC (60i) & PAL (50i) modes)
14. Auto White Balance Standard Data Input (NTSC (60i) & PAL
(50i) modes) (Note3)
15. MAX GAIN Adjustment (NTSC (60i) & PAL (50i) modes)
(Note3)
16. LV Standard Data Input (NTSC (60i) & PAL (50i) modes)
(Note3)
17. Auto White Balance Adjustment (NTSC (60i) & PAL (50i)
modes) (Note3)
18. Color Reproduction Adjustment (NTSC (60i) & PAL (50i)
modes) (Note3)
19. White Balance Check (NTSC (60i) & PAL (50i) modes)
(Note3)
20. Color Reproduction Check HD STD γ (NTSC (60i) & PAL
(50i) modes) (Note3)
21. Color Reproduction Check HD CINE γ (NTSC (60i) & PAL
(50i) modes) (Note3)
22. Color Reproduction Check SD STD γ (NTSC (60i) & PAL
(50i) modes) (Note3)
23. Color Reproduction Check SD CINE γ (NTSC (60i) & PAL
(50i) modes) (Note3)
24. PSD Sensor Gain Adjustment (NTSC (60i) & PAL (50i) modes)
(Note3)
25. Angular Velocity Sensor Sensitivity Adjustment (NTSC (60i)
& PAL (50i) modes)
HVR-Z1J/Z1U/Z1N/Z1E/Z1P/Z1C
(Note3)
CPC lid
Screw (M2x4)
(Note3)
6-23
S201
PAL (50i)
R
r
NTSC (60i)
Fig. 6-1-7.