Sony HVR-Z1J Service Manual page 266

Align the end of the flexible
adhesive sheet with the
chassis outer contour.
When attaching the drum flexible board, attach it without applying stresses
in such a manner so that it subjects to face downward.
After attaching the flexible board, apply a pressure of approximately
0.5 kgh
Apply also a pressure on the chassis edge R portion to be subjected to the
shape of the flexible board.
HVR-Z1J/Z1U/Z1N/Z1E/Z1P/Z1C
HOW TO ATTACH THE FLEXIBLE ADHESIVE SHEET,
Flexible Board Processing
Key Points in Re-assembling
I
Align the end of the flexible adhesive sheet
with the edge of the hole I on the chassis.
Hook the flexible board on
the notch and break it.
I
Sensor flexible board
Align the straight line portion of
the flexible board with the edge
of the hole I on the chassis.
¥ cm on the entire adhesive portion.
Flexible adhesive sheet
(shape before peeling
off the cover sheet)
Align the bottom of the unused
printed land of the flexible board
with the chassis contour.
Flexible adhesive sheet
(shape after peeling off
the cover sheet)
Drum flexible board
6-75
Hook the flexible board on
the notch and break it.