Psd Sensor Gain Adjustment (Pal (50I) Mode) - Sony HVR-Z1J Service Manual

24-3.

PSD Sensor Gain Adjustment (PAL (50i) mode)

Copy the adjustment data of NTSC (60i) mode.
Subject
Adjustment Page
Adjustment Address
Note1: This adjustment should be carried out upon completion of the
NTSC (60i) mode adjustments.
Note2: Check that the data of page: 6, address: 02 is "00". If not, to page:
6, address: 01, set data: 00, and press the PAUSE button.
Switch setting:
NTSC (60i)/PAL (50i) ............................................ PAL (50i)
Adjusting method:
Order Page Address Data
1 0 01
2 6 D0
3 6 D1
4 6 D2
5 6 01
6 6 02
Note3: The adjustment data will be automatically input to page: F, address:
84, 85.
Processing after Completing Adjustments:
Order Page Address Data
1 6 01
2 0 01
HVR-Z1J/Z1U/Z1N/Z1E/Z1P/Z1C
Not required
F
84, 85
Procedure
01 Set the data.
0F Set the data.
84 Set the data.
02 Set the data.
FB Set the data, and press PAUSE
button.
Check that the data changes to
"01". (Note3)
Procedure
00 Set the data, and press PAUSE
button.
00 Set the data.
6-55