Data Code; Disp Output; Zoom Display - Sony HVR-Z1J Service Manual

DATA CODE

LETTER SIZE
REMAINING

DISP OUTPUT

ZOOM DISPLAY

80
Using the Menu
Select the item to be displayed when you press DATA CODE (p. 51).
GDATE/CAM Select to display the date and time, or the camera settings data during
playback.
DATE Select to display the date and time during playback.
GNORMAL Select to display the menu screen at normal size.
2x Select to display the selected menu item at double the normal height.
GAUTO
Select to display the remaining tape indicator for about 8 seconds:
• After you set the POWER switch to CAMERA or VCR with a
cassette inserted, and your camcorder calculates the remaining
amount of tape.
• After you press N (play) or DISPLAY/BATT INFO.
ON Select to always display the remaining tape indicator.
GLCD PANEL Select to show indicators such as the time code on the LCD screen and
in the viewfinder.
V-OUT/PANEL Select to show indicators such as the time code on the TV screen, LCD
screen, and in the viewfinder.
Note
b
• You cannot input a signal to your camcorder if you press DISPLAY/BATT INFO or the
ASSIGN button assigned to the DISPLAY function while [V-OUT/PANEL] is selected.
GBAR
Select to indicate the zoomed position using the bar display.
NUMBER Select to indicate the zoomed position using numbers (0 through 99).