Gooseneck Gear Assy - Sony HVR-Z1J Service Manual

Digital video camera recorder
Hide thumbs Also See for HVR-Z1J:
Table of Contents

Advertisement

2-3-16. Gooseneck Gear Assy

1. Removal procedure
1)
Move the LS chassis block assy 1 in the direction of the arrow
A to make it in YJ position.
YJ position: The position B where gooseneck gear assy can
be removed. (where the center of LS chassis hole matches with
junction gear shaft.)
2)
Remove the gooseneck gear assy2, holding it with C.
3)
Remove the T washer 3.
1 LS chassis block
assy
GOOSENECK
GEAR ASSY
Points
to be noted
Hold the C
C
portion
C
Shaft D
HVR-Z1J/Z1U/Z1N/Z1E/Z1P/Z1C
YJ Position
A
B The position where gooseneck gear assy can be removed.
2 Gooseneck gear assy
3 T washer
2. Attachment procedure
1)
Install the T washer 3.
2)
Apply grease to the gooseneck gear shaft D portion.
Amount of grease: a ball of grease of 1.0 mm diameter
Need no re-application to one which applied already.
3)
Install the gooseneck gear assy 2, holding it with C in the
gooseneck gear shaft.
4)
Move it closer to the S reel.
Mechanism chassis block assy
(Where the center of LS chassis hole matches with junction gear shaft.)
GOOSENECK GEAR ASSY
Points to be noted
Gooseneck gear shaft
Amount of grease: a ball of
grease of 1.0 mm diameter
Re-application of grease to
the point which is greased
already before is not necessary.
• Do not apply grease to the
wrong position.
• Do not forget to apply grease.
• Do not make mistake about amount of grease.
• When applying grease, do not splash or touch
grease to any other parts and components.
6-89
junction gear shaft
LS chassis hole
Key Points
in Re-assembling
S reel
After installation, move it closer to
the S reel side.
Apply Grease
Apply grease

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvr-z1uHvr-z1nHvr-z1eHvr-z1pHvr-z1c

Table of Contents