Sony HVR-Z1J Service Manual page 355

2
Press BATT RELEASE and slide the
battery pack up.
To check the remaining battery – Battery
Info
You can check the battery's current charge level
and its current remaining recording time when
the power is turned off. The remaining
recording time in the selected recording format
appears.
1
Set the POWER switch to OFF.
2
Open the LCD panel and adjust the
angle.
3
Press DISPLAY/BATT INFO.
The battery information appears for about
7 seconds.
Keep the button pressed to view it for about
20 seconds.
BATTERY INFO
BATTERY CHARGE LEVEL
0%
REC T I ME AVA I LABLE
LCD SCREEN:
V I EWF I NDER:
A Battery charge level: Displays
approximate remaining amount of
power left in the battery pack.
B Possible recording time using the LCD
panel.
12
Getting started
50% 100%
1 0 5
min
1 1 5
min
C Possible recording time using the
viewfinder.
Charging time
Approximate number of minutes required when
you fully charge a fully discharged battery pack
using the supplied AC Adaptor/charger at 25°C
(77°F). (10 – 30°C (50 – 86°F) recommended.)
Battery pack
NP-F570 (supplied)
NP-F770
NP-F970
b Note
• NP-F330/F530/500/510/710 battery packs cannot be
used with your camcorder.
Recording time
Approximate number of minutes available
when you use a fully charged battery pack at
25°C (77°F).
Recording in the HDV format
Battery pack Continuous
recording
time
NP-F570 105
(supplied) 115
115
NP-F770 220
245
235
NP-F970 335
370
360
Recording in the DVCAM/DV SP format
Battery pack Continuous
recording
time
NP-F570 110
(supplied) 125
120
NP-F770 235
255
250
Full charge
(Practical charge)
145 (85)
230 (170)
310 (250)
Typical
recording
time
55
60
60
120
120
120
185
190
190
Typical
recording
time
60
60
60
130
130
130