Viewing Information About The Media And The System; Displaying The Amount Of Media Remaining; Verifying The Setting For The Amount Remaining Every Time The Media Is Changed - Roland Soljet Pro III XJ-740 User Manual

5-10 Viewing Information about the Media and the System

Displaying the Amount of Media Remaining

Procedure
–
—
˜
™
This display is updated.
If setup has not been performed,
the set value flashes.
Description
You can display how much of the media in use is left. Once you set the amount of media remaining, the amount
remaining is displayed at the top menu until it reaches zero. If you cancel the setup such as by removing the media ,
the amount remaining at that time flashes on the screen.
The amount of media remaining is not updated automatically when you change the media. Redo the setting whenever
you change the media.
You can also make the setting display this menu item automatically whenever you change the media. See the next
section, "Verifying the Setting for the Amount Remaining Every Time the Media Is Changed."
Note: The remaining amount that is displayed is only an estimate, and its accuracy is not assured.

Verifying the Setting for the Amount Remaining Every Time the Media Is Changed

Procedure
–
—
˜
™
Press .
Press .
Press .
Press .
Press .
Use to set the amount of media remaining.
Press to enable the setting.
Press .
Press to go back to the original screen.
Press .
Press .
Press .
Press twice.
Press .
Use to select "ENABLE."
Press to enable the setting.
Press .
Press to go back to the original screen.
Chapter 5 Feature Reference 93