Default Setting
[SCAN INTERVAL]: OFF
Preventing Media from Coming Loose
Procedure
MENU
SUB MENU
SUB MENU
VACUUM POWER
VACUUM POWER
AUTO
90%
W1200mm
SETUP SHEET
Description
The platen uses suction to grip the media and keep it stable. When media comes loose from the platen because it is warped
or wrinkled, increasing the suction force may help correct the problem. Conversely, when the media is flimsy and cannot
move smoothly, reducing the suction force may help.
When set to "AUTO," the suction force is automatically adjusted to the optimal level for the media width.
You can also make this setting on the computer. When you have made the setting on the computer, the computer's setting
is used and the printer's setting is ignored.
Default Setting
[VACUUM POWER]: AUTO
Speeding Up Output for Narrow Media
Procedure
MENU
SUB MENU
SUB MENU
FULL WIDTH S
FULL WIDTH S
FULL
OFF
4-5 Accommodating Various Kinds of Media
Press
.
Press
several times.
Press
.
Press
twice.
Press
.
Use
to set the value.
Press
to enable the setting.
Press
to go back to the original screen.
Press
.
Press
several times.
Press
.
Press
several times.
Press
.
Use
to select "SHEET" or "OFF."
Press
to enable the setting.
79