Account Code Entry; Alternate Calling - Ring/Voice - Panasonic KX-TA624 Installation Manual

3 Features

Account Code Entry

An account code is used to identify incoming and outgoing outside calls for accounting and
billing purposes. The account code is appended to the SMDR call record. For incoming
outside calls, an account code is optional. For outgoing outside calls, there are 4 account
input modes programmable in program [605], Option, Forced, Verify–All and Verify–Toll.
Option:
Forced:
Verify–All: Enables to make an outside call if the code entered within 5 seconds after an
Verify–Toll: Enables to override call barring temporarily by entering one of the account
• Required System Programming
[310] Account Codes
[601]-[603] Call Barring – Class of Service Assignment —Day/Night/Lunch
[605] Account Code Entry Mode
[805] SMDR Account Code Selection
• Related Feature References
Station Message Detail Recording (SMDR),
Call Barring Override by Account Codes
• Operating Instructions Reference
1.7 Useful Features, "Calling with Account Codes (Account Code Entry)"
Alternate Calling – Ring/Voice
This system offers a proprietary telephone user 2 types of intercom calling, Voice Call mode
and Tone (ring) Call mode. "Voice Call" informs the called party of an incoming call with
the calling party's voice, while "Tone Call" uses a ring tone. A proprietary telephone user
can select "Voice Call" or "Tone Call" in the Proprietary Telephone Settings. If the user
selects "Voice Call", the calling party can talk to the user immediately after the confirmation
tone. The calling party can switch the pre-set mode at the called extension, from "Voice
Call" to "Tone Call" or vice versa, by pressing " " after dialling the extension number.
!
!
• A rotary telephone user cannot change the pre-set mode at the called extension.
• Operating Instructions References
1.2 Proprietary Telephone Settings, "Customising Your Telephone Functions", Intercom
1.7 Useful Features, "Alternate Calling – Ring/Voice"
A 4-digit code may be entered during a conversation or within 30 seconds
after a conversation when a record is needed.
A 4-digit code must be entered within 5 seconds after an exchange line is
seized. The code can be any number.
extension user seizes an exchange line is the same as one of the account
codes programmed in [310].
codes programmed in [310] within 5 seconds after an exchange line is
seized. Calls with COS numbers 3 through 5 will be treated as calls with
COS number 2. Calls with COS numbers 1 and 2 will not be affected.
Alert Assignment
A
3-3
Features