Placing A Call In System Parking Area (Call Park) - Panasonic KX-TA624 Installation Manual

1.5 During a Conversation

Placing a Call in System Parking Area (Call Park)

Allows you to place a held call into a system parking area so that you can perform other tasks.
The parked call can be retrieved by any extension user. Up to 10 calls can be parked.
PT and SLT
During a conversation
HOLD
For a PT
R
For an SLT
For a PT: Press HOLD.
For an SLT: Press Recall.
Retrieving a parked call
PT and SLT
Lift the handset or press
SP-PHONE/MONITOR.
!
• If a parked call is not retrieved within a pre-determined time (default: 30 seconds), ringing
!
will be heard (Hold Recall).
• If a parked call is not retrieved within 30 minutes, it will be automatically disconnected.
• This feature is useful when you want to hold more than one intercom call with a PT, or
more than one intercom or outside call with an SLT.
• During a 5-party conference, you cannot use this feature.
PT
• 1.7 Useful Features, "Conference (5-party)"
• See the Installation Manual, Section 3, "Call Park".
3
Confirmation tone Dial 36.
and dial tone
• If you hear a busy tone, it indicates the specified parking zone is
unavailable.
• You do not need to redial the feature number to change the parking
zone. Just enter the parking zone number while hearing the busy tone.
5 6 parking zone no.
Dial 56. Enter a parking zone number
(0 through 9) where the call
is to be parked.
• If there is no held call, you will hear a reorder tone.
6
parking zone no.
Enter a parking zone number
(0 through 9).
Confirmation tone
and dial tone
Confirmation tone
and dial tone
You can talk
to the party.
1-41
Operations