During A Conversation; Placing A Call On Hold; Placing A Call On Hold (Call Hold) - Panasonic KX-TA624 Installation Manual

Advanced hybrid system
Hide thumbs Also See for KX-TA624:
Table of Contents

Advertisement

1.5

During a Conversation

Placing a Call on Hold (Call Hold)

Allows you to place a call on hold.

Placing a call on hold

PT
During a conversation
HOLD
Press HOLD.
• You may replace the handset.
• The corresponding line key or INTERCOM
light flashes green slowly.
Retrieving a call on hold
PT
At the holding extension
CO
Press the line key or INTERCOM
which is flashing green slowly.
• The line key or INTERCOM indicator light
turns steady green.
!
• To retrieve a call on hold at another extension, refer to "Retrieving a Call on Hold (Call Hold
!
Retrieve)".
• If a held call is not retrieved within a pre-determined time (default: 30 seconds), ringing or an
alarm tone will be heard (Hold Recall/Hold Alarm). If the hold recall time is set to "Disable",
the call will not recall.
• If a held outside call is not answered within 30 minutes, it will be automatically disconnected.
• When going off-hook:
— Before recalling: A dial tone will be heard while the call is on hold. You may dial another
— While recalling: Only the first call on hold will be answered.
• You cannot hold a doorphone call.
1-38
Operations
Confirmation tone
and dial tone
INTERCOM
or
telephone number.
SLT
During a conversation
R
Press Recall.
• You may replace the
handset.
SLT
At the holding extension
R
Press Recall.
• If the handset is replaced, just
go off-hook to retrieve the call.
Confirmation tone
and dial tone

Advertisement

Table of Contents
loading

Table of Contents