Ucd Intercept Mode; Ucd Ringing Time Before Intercept; Ucd Ringing Time After Intercept - Panasonic KX-TA624 Installation Manual

[524]-[526]

[524] UCD Intercept Mode*

Selects the operation when all extensions in the UCD group do not answer an outside call
via the UCD feature within the length of time programmed in [525] "UCD Ringing Time
before Intercept". Intercept or Disconnect is available.
Intercept: The call is redirected depending on programs [408]-[410] "Flexible Ringing
Disconnect: The call is disconnected.
5 2
Default
• Feature References
Section 3, Features
Intercept Routing, Uniform Call Distribution (UCD)

[525] UCD Ringing Time before Intercept*

Assigns the length of time for the Intercept Routing – No Answer feature (
Intercept Mode", Intercept). When the time expires, the system starts to redirect the call to
the programmed extension(s).
5 2
Default
• Feature References
Section 3, Features
Intercept Routing, Uniform Call Distribution (UCD)

[526] UCD Ringing Time after Intercept*

Assigns the length of time to call the extension(s) where a call is redirected by the Intercept
Routing – No Answer feature (
programmed in [525] "UCD Ringing Time before Intercept" expires.
5 2
Default
• Feature References
Section 3, Features
Intercept Routing, Uniform Call Distribution (UCD)
4-68
System Programming
4.2
1
Assignment–Day/Night/Lunch" (Intercept Routing – No Answer feature).
4
NEXT
SELECT
(Intercept/
Disconnect)
Intercept
5
NEXT
SELECT
(10/20/30/
40/60/120 sec)
20 seconds
[524] "UCD Intercept Mode", Intercept) after the time
6
NEXT
SELECT
(10/20/30/
40/60/120 sec)
20 seconds
* 1 : Required only when the optional OGM/FAX Detection
Card is installed.
System Programming
STORE END
1
END
STORE
1
STORE
END
[524] "UCD