Smdr Parameter; Incoming/Outgoing Call Selection For Printing - Panasonic KX-TA624 Installation Manual

4.2 System Programming

[801] SMDR Parameter

Assigns the following 2 printing parameters to match the SMDR output with the paper size
used in the printer.
Page Length: Sets the number of lines per page.
Skip Perf:
(Perforation)
8 0
< Sets the skip perforation >
NEXT
Default
! • The page length should be at least 4 lines
!
longer than the skip perforation length.
• To correct a wrong entry, press the CLEAR
button and enter the new one.
• Feature Reference
Section 3, Features
Station Message Detail Recording (SMDR)

[802] Incoming/Outgoing Call Selection for Printing

Determines which calls will produce an SMDR printout.
8 0
* 1 Outgoing: On (Print all calls) / Off (No printing) / Toll (Print toll calls only)
* 2 Incoming: On (Print all calls) / Off (No printing)
Default
!
• If "Outgoing; Toll" is selected, only calls which are checked in programs [302]–[305] "Call
!
Barring – Classes 2 through 5 Denied Codes" and are allowed, are printed out.
• Feature Reference
Section 3, Features
Station Message Detail Recording (SMDR)
Sets the number of lines to be skipped at the end of every page.
< Sets the page length >
1
page length
NEXT
(4···99)
skip perforation
STORE
(0···95)
Page length – 66 lines
Skip perforation – 0 line
< Sets an outgoing call >
2
SELECT
NEXT
(On/Off/Toll)*
Outgoing calls / Incoming calls – On
STORE
END
<Example>
Standard paper
for the SMDR
(11 inches)
skip
perforation
< Sets an incoming call >
NEXT SELECT
STORE
(On/Off)*
1
System Programming
[801]-[802]
page
66 lines
length
machine
perforation
STORE
END
2
4-83