Call Forwarding; Calling Party Control (Cpc) Signal Detection - Panasonic KX-TA624 Installation Manual

3 Features

Call Forwarding

Allows an extension user to transfer incoming calls automatically to another extension or to
an external destination. The following types are available.
All Calls:
Busy or No Answer:
To an Exchange Line: Allows an extension user enabled in program [607] to forward all
Follow Me:
!
!
• Extensions which have already been assigned as
a forwarded destination cannot set the Call
Forwarding feature.
• If the Do Not Disturb (DND) feature has
already been set, setting the Call Forwarding
feature will cancel DND.
• When using the call forward to an exchange line feature the quality of service may be
adversely affected by the attenuation across the public telephone network.
• Required System Programming
[202] Call Forwarding Start Time
[607] Call Forwarding to an Exchange Line
• Related Feature Reference
Limited Call Duration
• Operating Instructions References
1.2 Proprietary Telephone Settings, "Customising the Buttons on Your Telephone",
1.6 Before Leaving Your Desk, "Forwarding a Call (Call Forwarding)"

Calling Party Control (CPC) Signal Detection

The Calling Party Control (CPC) signal is a disconnect signal sent from the Local Exchange
for an outside call. The CPC signal detection is activated by programs [420] and [421].
Program [420] is for incoming outside calls, and [421] is for outgoing outside calls.
• Required System Programming
[420] Calling Party Control (CPC) Signal
[421] CPC Detection for Outgoing Calls
All incoming calls are forwarded to another extension.
All incoming calls are forwarded to another extension when the
extension user does not answer within the programmed time in
[202] or when the extension is busy.
incoming intercom calls to an external party.
Allows an extension user to set the Call Forwarding – All Calls
feature from another extension.
FWD/DND (Forward/Do Not Disturb) Button
C
3-15
Features