Panasonic KX-TA624 Installation Manual page 292

2.2 Telephone Features
Checking
Display Operation (— for the KX-T7130 only)
01:0111111111
02:0924773333
2-6
Operations
When the Caller ID Indication button indicator is red, there are new
calls logged.
1. Press the Caller ID Selection button to confirm the number of
logged calls.
<Example>
If there are 2 unchecked calls and 3 checked calls:
New:02 Old:03
• The a
bove information will be displayed for 3 seconds.
2. Press the Caller ID Indication button while on-hook to see the
incoming call information.
• The new information that you have not checked will be
displayed first.
3. You can check another caller's information by pressing the Caller
ID Indication button again.
After displaying all of the new information, the old information you
have already checked will be displayed.
• To modify the telephone number, use the HOLD button to erase
from the first digit. "0 to 9,
add numbers from the first digit.
• To clear the displayed information, press the TRANSFER button.
• To clear all logged call information, go off-hook and press 70 #.
The display shows as follows.
CID Log Clear
• To return to the initial display, go off-hook and on-hook, or wait
for 20 seconds.
• Pressing the Caller ID Selection button provides you with further
information about the party.
The display changes as follows.
<Example>
If the information is stored in log 03,
03:BOB HANKS
03:0011223344
03:30Oct 09:00PM
• If "OUT OF AREA" is displayed, the call may be from out of
the calling area.
• If "LONG DISTANCE" is displayed, it may be a long distance
call.
• If "PRIVATE" is displayed, the caller chose not to show their
information.
, # and PAUSE " can be used to
— caller's name
— caller's number
— date and time