Smdr Parameter - Panasonic KX-TA308 Installation Manual

4.2 System Programming

[801] SMDR Parameter

Assigns the following 2 printing parameters to match the SMDR output with the paper size
used in the printer.
Page Length: Sets the number of lines per page.
Skip Perf:
(Perforation)
8
< Sets the skip perforation >
NEXT
Default
• The page length should be at least 4 lines
!
!
longer than the skip perforation length.
• To correct a wrong entry, press the CLEAR
button and enter the new one.
• Feature Reference
Section 3, Features
Station Message Detail Recording (SMDR)
[802] Incoming/Outgoing Call Selection for Printing
Determines which calls will produce an SMDR printout.
8
* 1 Outgoing: On (Print all calls) / Off (No printing) / Toll (Print toll calls only)
* 2 Incoming: On (Print all calls) / Off (No printing)
Default
• If "Outgoing; Toll" is selected, only calls which are checked in programs [302]–[305] "Toll
!
!
Restriction – Classes 2 through 5 Denied Codes" and are allowed, are printed out.
• Feature Reference
Section 3, Features
Station Message Detail Recording (SMDR)
Sets the number of lines to be skipped at the end of every page.
< Sets the page length >
0 1
NEXT
skip perforation
(0···95)
Page length – 66 lines
Skip perforation – 0 line
< Sets an outgoing call >
0 2
NEXT
(On/Off/Toll)*
Outgoing calls / Incoming calls – On
page length
STORE
(4···99)
STORE END
<Example>
Standard paper
for the SMDR
(11 inches)
< Sets an incoming call >
SELECT STORE
1
[801]-[802]
66 lines
skip
perforation
machine
perforation
NEXT SELECT
STORE
(On/Off)* 2
System Programming
page
length
END
4-83