Service Time Menu - Faema E92 Manual

English
4.

Service time menu

fryday
Boiler P.
To access "service time" menu, press the PROG key (32)
and then the key "-" (35); the message shown below will
appear on the display:
CUSTOMER PROG.
SERVICE TIME
Pressing the PROG key (32), the following message will
appear on the display:
SERVICE TIME
DAY AND TIME
Press the PROG (32) key.
Use the "+" (34) and "-" (35) keys to move the cursor to the
entry to be modified, then press the PROG (32) key. The
cursor will turn into an arrow
change the number for the selected entry by using the "+"
(34) and "-" (35) keys.
Once the operation is completed, press the 4 4 4
confirm the data.
Repeat the operation described above to modify other
parameters.
Pressing the "-" key (35) the following message will appear
on the display:
SERVICE TIME
START AND PERIOD
Pressing the PROG key (32), the following message will
appear on the display:
START
07:30
When the PROG key (32) is pressed another time, the activation
hour (e.g. 07) flashes.
Press the "+" (34) and "-" (35) keys until the correct activate
hour for Monday is displayed.
N.B. If the "+" (34) and "-" (35) keys are kept depressed, the
hours number changes at a greater speed.
When the PROG key (32) is pressed, the minutes of the
switch-on time will flash on the display (e.g. 30). Using the "+"
(34) and "-" keys (35) this figure can be changed to show the
corresponding minutes of the desired switch-on time.
09:20
1.1bar
and it becomes possible to
4 4 4 (33) key to
4 4 4 4 4 4
4 4 4
PERIOD
MON 16:30
When the PROG key (32), is pressed, the hour of the operation
time will flash on the display (e.g. 16). Using the "+" (34) and
"-" keys (35) this figure can be changed to show the
corresponding hour of duration for Monday.
u
+
When the PROG key (32) tis pressed, the minutes of the
operation time will flash on the display (e.g. 30). Using the "+"
u
(34) and "-" keys (35) this figure can be changed to show the
desired number of minutes.
Examples
1) When the set day (e.g. Monday) corresponds to the closing
u
day, set the activation time to "00:00" and the duration to
+
"00:00".
u
2) If the machine needs to remain on at all times, set the
time of activation to "00:00" and the duration to "24:00".
3) If the machine needs to be switched on at 07:30 and switch
off at midnight, set the activation time to "07:30" and the
duration to "16:30".
How to perform other operations
When the PROG key (32) is pressed, the activation time will
once again be displayed (if this needs to be changed, follow
the above procedures).
Pressing the 4 4 4
on the display:
START
07:30
u
+
u
When the "-" (35) key is pressed, the message " activate
duration " for the next day is displayed:
START
08:20
u
+
u
67
4 4 4 (33) key, the following message will appear
4 4 4 4 4 4
4 4 4
MON
TUE
English
u
PERIOD
+
16:30
u
u
PERIOD
+
18:00
u