Programming The Coffee Distribution Keys; Programming The Cappuccino Distribution Keys - Faema E92 Manual

Hide thumbs Also See for E92:
Table of Contents

Advertisement

English
3.1

Programming the coffee distribution keys

Press one of the coffee dispensing keys on the selection
panel (the relative led will remain on, not flashing). The
following message will appear on the display:
selection XXX
Water dose
Each dispensing unit is controlled by a panel that permits
programing the amount of desired dispensing for each
button.
The following coffee selection parameters can be modified:
- water dose (volumetric dosage pulses, from 0 to 999, with
increments of 1).
Programming measures using the "SELF-LEARNING"
function
To perform the coffee dose programming, follow the
procedure herebelow:
1) Fill the filter carrier (21) with the correct dose of ground
coffee) and insert into the group ensuring it is correctly
locked in place (do not use previously used coffee
grounds).
2) Place the cup by the filter carrier spout (21).
3) Press the PROG (32) key; the following message will
appear on the display:
selection XXX
Water dose
when modifying data, the cursor changes to "
4) Keep the distributor key pressed, as evidenced by the
flashing led (the coffee dose counter starts from zero and
increases in value).
3.2

Programming the cappuccino distribution keys

Press one of the cappuccino dispensing keys. The related
LED remains on and does not blink. The display appears as
follows:
selection XXX
Milk dose
Cappuccino selection parameters that can be changed are:
- Milk dose (milk dispensing time: 0 ÷ 60 seconds, with
increments of 0.1);
- Milk start/coffee start ** (milk dispensing delayed after
coffee dispensing, and vice versa)
- Water dose (volumetric dosage pulses, from 0 to 999, with
increments of 1).
u
+
090
u
5) When the quantity of the coffee in the cup has reached the
desired level, release the key (the counter will indicate the
number of pulses that correspond to the set dose).
It is also possible to vary the coffee doses or set the dose
using the "+" (34) and "-" keys (35).
u
+
When the key444
090
u
is again displayed:
".
26
u
+
27
03.6s
u
18
62
444
444
444 (33) is pressed, the following message
444
selection XXX
Water dose
English
21
u
+
090
u
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

E92a

Table of Contents