Programming; Technician Programming - Coffee Selection; Technician Programming - Cappuccino - Milk Selection - Faema E92 Manual

English
2.

Programming

Friday
Boiler P.
Display of available menus: press the PROG (32) key.
TECHNICAL PROG.
KEY MENU
Access to menus: Use the "+" (34) and "-" (35) keys to position the
cursor on the desired line, then press the PROG (32) key (press a
selection key if the "SELECT KEY" menu appears).
selection XXX
Water dose
Use the "+" (34) and "-" (35) keys also to modify the message or
number.
Note: When modifying data, the cursor changes to " ".
Exiting the programming menu: press the
3.

Technician programming - Coffee selection

Press one of the coffee dispensing keys (the relative led will remain
on, not flashing). The following message will appear on the display:
selection XXX
Water dose
4.

Technician programming - Cappuccino - Milk selection

Press one of the cappuccino – milk dispensing keys. The related LED
remains on and does not blink. The display appears as follows:
selection XXX
Milk dose
09:20
1.1bar
u
+
u
u
+
090
u
4 4 4 4 4 4
4 4 4 4 4 4 4 4 4
(33) key.
u
+
090
u
u
+
03.6s
u
31 32
The following coffee selection parameters can be modified:
- water dose (volumetric dosage pulses, from 0 to 999, with
increments of 1).
Cappuccino-milk selection parameters that can be changed are:
- Milk dose (milk dispensing time: 0 ÷ 60 seconds, with increments
of 0.1);
- Milk start/coffee start ** (milk dispensing delayed after coffee
dispensing, and vice versa)
- Water dose (volumetric dosage pulses: 0 ÷ 999, with increments
of 1).
164
33 34 35 36
English