Programming The Milk Distribution Key - Faema E92 Manual

English
3.3

Programming the milk distribution key

N.B.: Also valid if the CAPPUCCINO function is not activated.
When the milk distribution key (16) is pressed (shown by the
flashing led), the following message will be displayed:
selection XXX
Milk dose
Milk selection parameters that can be changed are:
- Milk dose (milk dispensing time: 0 ÷ 60 seconds, with
increments of 0.1).
Programming measures using the "SELF-LEARNING"
function: milk dose
To memorize the programming of the milk dose, follow the
procedure herebelow:
1) Place the cup by the cappuccino maker (18).
2) Press the PROG (32) key; the following message will
appear on the display:
selection XXX
Milk dose
when modifying data, the cursor changes to "
3) Keep the distributor key pressed, as evidenced by the
flashing led (the coffee dose counter starts from zero and
increases in value).
4) When the quantity of milk in the cup has reached the
desired level, release the key (the counter will indicate the
rime that correspond to the set dose).
It is also possible to vary the milk dose or set the dose using
the "+" (34) and "-" keys (35).
444 444
444 (33) is pressed, the following message 444
When the key444
is again displayed:
selection XXX
Milk dose
u
+
03.6s
u
16
18
u
+
03.6s
u
".
u
+
03.6s
u
64
English