Drinks Distribution - Coffee - Faema Diplomat E91/A Manual

English
7.

Drinks distribution - coffee

Remove the filter carrier (43 or 49), clean it of the used coffee grounds
and refill it with 1 or 2 doses of ground coffee, according to the filter
carrier used.
Press the coffee evenly in the filter, using the dose-grinder press.
Remove any coffee grounds from the edges of the filter.
Insert the filter carrier (43 or 49) to the group, locking it firmly in place.
Position the cup (or cups) under the spout (or spouts) of the filter carrier
(43 or 49).
Press the coffee distribution key (36, 37, 38 or 39) corresponding to the
desired dose. The corresponding led lights up, the coffee will be issued
and will stop automatically upon completion.
Press the continuous/STOP distribution button (40) for a continuous
distribution.
The distribution, both dosed and continuous, may be interrupted at any
time by pressing the continuous/STOP key (40).
7.1 Drinks distribution - hot water
After having positioned the appropriate container under the hot water
nozzle (32), distribution is made in two ways.
DOSED FUNCTION
Press one of the hot water distribution keys (51.1, 51.2 or 51.3). The
corresponding led will light up, hot water will be issued and will stop
automatically upon completion.
The distribution may be interrupted at any time by pressing the previously
active key again (shown by the lighted led).
CONTINUOUS FUNCTION
Press the hot water distribution key (51.3) and keep pressed for
approximately 3 seconds.
Hot water will be issued continuously until the hot water key (51.3) is
pressed again to stop this function.
In continuous function the progrmmed dosed in the key is not changed.
7.2 Drinks distribution - milk
MILK
Milk is a biological product which is delicate and therefore easily perishable
since heat changes its structure. From the moment the container is
opened throughout the entire period of its use, milk must therefore be
maintained at a suitable temperature for its preservation. “Frigobox ”
are suitable for this.
MILK DISTRIBUTION
Insert the tube (65) into the milk.
After having positioned the appropriate container under the cappuccino
maker (29), press the milk distribution key (42). The led above the selected
key lights up.
The quantity of milk memorized during the programming phase will flow
into the cup and will stop automatically. The flow can be stopped at any
time by pressing the milk distribution key (42) again.
Paragraph 8, “User Instructions for the Cappuccino Maker”
describes how to adjust the temperature of the milk and the density
of the milk froth.
!
“When the machine is not used for a long period of time, comply
with the hygiene procedures regarding preservation of milk”.
36
37
38
51.1
51.2
51.3
32
29
English
40
39
43
42
65