Components - Christie Mirage HD User Manual

Section 1: Introduction
How the projector works
1.2

Components

Lamp Type
500W Models
1000W Models
1200W Models
NOTE: Kc models include the same features, but are color corrected to film color standards.
1-2
Refer to Section 6 for a complete list of Specifications including Brightness and
Contrast and Optional Input Modules
The projector accepts data/graphics and video input signals for projection onto front
or rear flat screens. High brightness light is generated by an internal Xenon lamp then
modulated by three Digital Micro-mirror Device (DMD) panels that provide digitized
red, green or blue color information. Light from the "on" pixels of each panel is
reflected, converged and then projected to the screen through a single front lens,
where all pixels are perfectly superimposed as a sharp full-color image (2D or 3D for
Mirage models only).
The following listed items are shipped with your projector. Ensure you have received
all these items before using your projector.
•
User's Manual
•
IR remote keypad (includes two, 1.5V AA batteries and a mini-stereo cable for
conversion to wired)
•
Line cord
•
Stereo 3D Cable (Mirage only)
•
Warranty Card
Model Name Resolution
DLV1400-DX
DLV1920-DX
Christie HD3K
Christie HD2Kc
Mirage S+3K
Mirage HD3
Matrix S+2K
Matrix HD2
DW5K, 4Kc
Christie DS+6K/5Kc
Christie HD6K/5Kc
Mirage S+6K
Mirage HD6
Matrix S+5K
Matrix HD4
DW8K, DW6Kc
Christie DS+8K
Christie HD8K/7Kc
Mirage S+8K
Mirage HD8
Matrix HD7
ChristieTWIST
SXGA+ Optional
HD Optional
HD Optional
HD Optional
SXGA+ Optional
HD Optional
SXGA+
HD
HD2 Optional
SXGA+ Optional
HD Optional
SXGA+ Optional
HD Optional
SXGA+
HD
HD2 Optional
SXGA+ Optional
HD Optional
SXGA+ Optional
HD Optional
HD
Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User's Manual
3D Motorized Lens
020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher
Mount