Christie Mirage HD User Manual page 39

Time-outs
The Global Icon
Using Slide bars and
Other Controls
Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User's Manual
020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher
Lamp
Lamp Hours
Lamp S/N
1. Lamp Message
2. Lamp Limit
3. Lamp Mode
4. Power
5. Intensity
6. Optical Aperture
7. Lamp History
8. Change Lamp
Press from the presentation level to access general Help Topics. Scroll as
Help
necessary within a topic; press
If a slide bar, menu, or message is displayed, you have limited time in which to make
a keypad entry before the projector returns to presentation level
disappears. These time-outs may vary depending on what is displayed.
Menu options that include this icon apply universally to any incoming signal.
Most of the function menus allow you to change settings by using slide bars,
checkboxes, and pull-down lists. To select a slide bar, toggle a checkbox status, or
view a pull-down list, do one of the following within the function menu:
•
Enter the menu option number corresponding to the setting you wish to change
(for example, press
Position menu).
•
Move the highlight to the option desired and press
•
Move the highlight to the option desired and press
immediately.
•
Bypass the menus entirely and use a single key to immediately access an
adjustment during your presentation (applies only to options having their own
key, such as Contrast, Brightness, Gamma, etc.).
•
For "blind" access, hide the entire menu system (see OSD key, above) and/or
direct slide bars activated by their own key (such as Contrast, Brightness, etc.).
Control by using the proper key press or numerical sequence of key presses.
Once selected, change the setting as desired (see below) and press
return to the current function menu.
.
0
?
Help
1000
Power
500
0
3
or to return to your presentation.
Exit
Help
1 3 to select "Vertical Stretch" in the Size &
Menu
Section 3: Operation
Enable a notice upon power-up
indicating the lamp has logged a given
number of hours as specified by
the lamp limit (default is lamp specific).
and the graphic
Help
(Enter).
to adjust
to save and
3-11