Christie Mirage HD User Manual page 45

Copying or
Deleting Channels
Mirage S+/HD, Matrix S+/HD, Christie HD/DS/DW, DLV User's Manual
020-100001-04 Rev. 1 (12/07) - Software v1.6g or higher
•
Press if you want to edit channel setups (i.e., non-image related parameters)
for the selected channel. See Editing a Channel Setup, below.
, highlight the desired channel in the Channel Setup menu, then
TO COPY A CHANNEL
press to go to the Channel Copy/Delete submenu. Select "Copy" and press
Func
—a new channel will be created. It is identical to original, which still remains,
but it is identified with the next available number from 01-50. If you change your
mind and do not want to copy the current channel, press
the previous menu. Copying channels is a quick method for creating numerous
channels, each of which can then be edited and adjusted for a variety of presentations
in the future. See Figure 3.4.
TO DELETE A CHANNEL
then press to activate the Channel Copy/Delete submenu. Select "Delete" and
Func
press —a window will appear to confirm the deletion of this channel. See Figure
3.5.
TO DELETE MULTIPLE CHANNELS
and press to go to the Channel Copy/Delete submenu. Select "Delete Unlocked
Func
Only" and press to delete all unlocked channels. Select "Delete All Channels" to
delete all channels, even those that are locked. In either case, the current channel will
remain but will be redefined from projector defaults.
NOTE: For any deletion, a window will appear to confirm the deletion of the desired
channel. Select "Cancel" (default) if you don't want to delete after all.
.
Figure 3.4. Copying A Channel
, highlight the desired channel in the Channel Setup menu,
Figure 3.5. Deleting a Channel
highlight any channel in the Channel Setup menu
Section 3: Operation
to cancel and return to
Exit
3-17